dmesg - eVGA NVIDIA GeForce GTX 960
Linux version 4.9.30-desktop-1.mga6 (iurt@ecosse.mageia.org) (gcc version 5.4.0 (GCC) ) #1 SMP Thu May 25 16:56:45 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000be08ffff] usable
BIOS-e820: [mem 0x00000000be090000-0x00000000be464fff] reserved
BIOS-e820: [mem 0x00000000be465000-0x00000000be852fff] ACPI NVS
BIOS-e820: [mem 0x00000000be853000-0x00000000bee14fff] reserved
BIOS-e820: [mem 0x00000000bee15000-0x00000000bee15fff] usable
BIOS-e820: [mem 0x00000000bee16000-0x00000000bf01bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf01c000-0x00000000bf442fff] usable
BIOS-e820: [mem 0x00000000bf443000-0x00000000bf7f2fff] reserved
BIOS-e820: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000083fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./970M Pro3, BIOS P1.00 01/21/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-D2FFF write-protect
D3000-EAFFF uncachable
EB000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000840000000 aka 33792M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [ffff97b5c00fd8e0]
Base memory trampoline at [ffff97b5c0095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x757f63000, 0x757f63fff] PGTABLE
BRK [0x757f64000, 0x757f64fff] PGTABLE
BRK [0x757f65000, 0x757f65fff] PGTABLE
BRK [0x757f66000, 0x757f66fff] PGTABLE
BRK [0x757f67000, 0x757f67fff] PGTABLE
BRK [0x757f68000, 0x757f68fff] PGTABLE
BRK [0x757f69000, 0x757f69fff] PGTABLE
BRK [0x757f6a000, 0x757f6afff] PGTABLE
BRK [0x757f6b000, 0x757f6bfff] PGTABLE
BRK [0x757f6c000, 0x757f6cfff] PGTABLE
RAMDISK: [mem 0x36e64000-0x37729fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BE843070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BE8494C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt-658)
ACPI: DSDT 0x00000000BE843160 00635C (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BE84C080 000040
ACPI: APIC 0x00000000BE8495D0 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BE849670 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BE8496B8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BE8496F8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: AAFT 0x00000000BE849730 000062 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000BE849798 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000083fffffff]
NODE_DATA(0) allocated [mem 0x83fffa000-0x83fffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000083fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009afff]
node 0: [mem 0x0000000000100000-0x00000000be08ffff]
node 0: [mem 0x00000000bee15000-0x00000000bee15fff]
node 0: [mem 0x00000000bf01c000-0x00000000bf442fff]
node 0: [mem 0x00000000bf7f3000-0x00000000bf7fffff]
node 0: [mem 0x0000000100001000-0x000000083fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000083fffffff]
On node 0 totalpages: 8381534
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 12116 pages used for memmap
DMA32 zone: 775365 pages, LIFO batch:31
Normal zone: 118784 pages used for memmap
Normal zone: 7602175 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbe090000-0xbe464fff]
PM: Registered nosave memory: [mem 0xbe465000-0xbe852fff]
PM: Registered nosave memory: [mem 0xbe853000-0xbee14fff]
PM: Registered nosave memory: [mem 0xbee16000-0xbf01bfff]
PM: Registered nosave memory: [mem 0xbf443000-0xbf7f2fff]
PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff97bdffc00000 s106712 r8192 d32552 u262144
pcpu-alloc: s106712 r8192 d32552 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8250549
Policy zone: Normal
audit: disabled (until reboot)
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 32844240K/33526136K available (7496K kernel code, 1221K rwdata, 3260K rodata, 1404K init, 796K bss, 681896K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:4352 nr_irqs:1032 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3991.483 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7982.96 BogoMIPS (lpj=3991483)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffffa0e92000 - ffffffffa0e9a000)
ftrace: allocating 28618 entries in 112 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
MCE: In-kernel MCE decoding enabled.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (63857.85 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbe465000-0xbe852fff] (4120576 bytes)
PM: Registering ACPI NVS region [mem 0xbee16000-0xbf01bfff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
xor: automatically using best checksumming function avx
pinctrl core: initialized pinctrl subsystem
RTC time: 11:12:18, date: 06/03/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
raid6: sse2x1 gen() 7289 MB/s
raid6: sse2x1 xor() 4843 MB/s
raid6: sse2x2 gen() 11625 MB/s
raid6: sse2x2 xor() 7947 MB/s
raid6: sse2x4 gen() 13734 MB/s
raid6: sse2x4 xor() 6828 MB/s
raid6: using algorithm sse2x4 gen() 13734 MB/s
raid6: .... xor() 6828 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe30b000-0xfe30b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe30a000-0xfe30afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe309000-0xfe3090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe308000-0xfe308fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe307000-0xfe3070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe300000-0xfe303fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe306000-0xfe306fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe305000-0xfe305fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe304000-0xfe3040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:1401] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [144d:a804] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xfe200000-0xfe203fff 64bit]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:03:00.0: [1b6f:7052] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:06:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
pci 0000:06:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 06]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbe090000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbee16000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf443000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.3: PCI bridge to [bus 06]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8984K (ffff97b5f6e64000 - ffff97b5f772a000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
workingset: timestamp_bits=56 max_order=23 bucket_order=0
zbud: loaded
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v8r11 (with cgroups support)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b380 irq 19
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
Key type dns_resolver registered
mpls_gso: MPLS GSO support
microcode: microcode updated early to new patch_level=0x0600084f
microcode: CPU0: patch_level=0x0600084f
microcode: CPU1: patch_level=0x0600084f
microcode: CPU2: patch_level=0x0600084f
microcode: CPU3: patch_level=0x0600084f
microcode: CPU4: patch_level=0x0600084f
microcode: CPU5: patch_level=0x0600084f
microcode: CPU6: patch_level=0x0600084f
microcode: CPU7: patch_level=0x0600084f
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
Magic number: 5:557:225
memory memory107: hash matches
rtc_cmos 00:03: setting system clock to 2017-06-03 11:12:18 UTC (1496488338)
BIOS EDD facility v0.16 2004-Jun-25, 5 devices found
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: NCQ Send/Recv Log not supported
ata2.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: NCQ Send/Recv Log not supported
ata2.00: configured for UDMA/133
ata3.00: ATA-10: INTEL SSDSC2BW240H6, RG21, max UDMA/133
ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-10: INTEL SSDSC2BW240H6, RG21, max UDMA/133
ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata5.00: ATA-10: WDC WD5001FZWX-00ZHUA0, 01.01A01, max UDMA/133
ata5.00: 9767541168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata5.00: configured for UDMA/133
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 RG21 PQ: 0 ANSI: 5
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 RG21 PQ: 0 ANSI: 5
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 3:0:0:0: [sdd] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA WDC WD5001FZWX-0 1A01 PQ: 0 ANSI: 5
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: [sde] 9767541168 512-byte logical blocks: (5.00 TB/4.55 TiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
Freeing unused kernel memory: 1404K (ffffffffa0d33000 - ffffffffa0e92000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 680K (ffff97bd17756000 - ffff97bd17800000)
Freeing unused kernel memory: 836K (ffff97bd17b2f000 - ffff97bd17c00000)
dracut: dracut-044
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
dracut: Starting plymouth daemon
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
nvme nvme0: pci function 0000:02:00.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe309000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.30-desktop-1.mga6 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe307000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.30-desktop-1.mga6 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.30-desktop-1.mga6 xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:16.2: EHCI Host Controller
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.30-desktop-1.mga6 xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe304000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.9.30-desktop-1.mga6 ehci_hcd
usb usb5: SerialNumber: 0000:00:16.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe30a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.9.30-desktop-1.mga6 ohci_hcd
usb usb6: SerialNumber: 0000:00:12.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe308000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.9.30-desktop-1.mga6 ohci_hcd
usb usb7: SerialNumber: 0000:00:13.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe306000
tsc: Refined TSC clocksource calibration: 3991.447 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x731198bbb02, max_idle_ns: 881590455206 ns
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.9.30-desktop-1.mga6 ohci_hcd
usb usb8: SerialNumber: 0000:00:14.5
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:16.0: irq 18, io mem 0xfe305000
nvme0n1: p1
BTRFS: device fsid 260f517c-9767-40e5-80f1-e9a5ec8c87d6 devid 1 transid 15170 /dev/nvme0n1p1
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.9.30-desktop-1.mga6 ohci_hcd
usb usb9: SerialNumber: 0000:00:16.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
BTRFS info (device nvme0n1p1): use ssd allocation scheme
BTRFS info (device nvme0n1p1): disk space caching is enabled
BTRFS info (device nvme0n1p1): has skinny extents
random: fast init done
usb 3-4: new full-speed USB device number 2 using xhci_hcd
dracut: Mounted root filesystem /dev/nvme0n1p1
dracut: Switching root
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
NET: Registered protocol family 10
systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target RPC Port Mapper.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Encrypted Volumes.
BTRFS info (device nvme0n1p1): disk space caching is enabled
usb 6-3: new full-speed USB device number 2 using ohci-pci
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
acpi_cpufreq: overriding BIOS provided _PSD data
usb 9-2: new full-speed USB device number 2 using ohci-pci
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
systemd-journald[540]: Received request to flush runtime journal from PID 1
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
sp5100_tco: I/O address 0x0cd6 already in use
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffba9683165000, d0:50:99:84:c8:5d, XID 0c900800 IRQ 38
r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
md: bind
md: bind
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
md: raid0 personality registered for level 0
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
md/raid0:md0: md_size is 937153536 sectors.
md: RAID0 configuration for md0 - 1 zone
md: zone0=[sdd1/sdc1]
zone-offset= 0KB, device-offset= 0KB, size= 468576768KB
md0: detected capacity change from 0 to 479822610432
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EDAC MC: Ver: 3.0.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
fuse init (API version 7.26)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: acl
r8169 0000:06:00.0 enp6s0: renamed from eth0
usb 6-3: New USB device found, idVendor=046d, idProduct=c332
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-3: Product: Gaming Mouse G502
usb 6-3: Manufacturer: Logitech
usb 6-3: SerialNumber: 168636753933
usb 3-4: New USB device found, idVendor=047f, idProduct=c023
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: Plantronics C310-M
usb 3-4: Manufacturer: Plantronics
usb 3-4: SerialNumber: E4BC95135CBD5349A1BDD8D1F5A198A9
usb 9-2: New USB device found, idVendor=2433, idProduct=b200
usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-2: Product: 690LC
usb 9-2: Manufacturer: ASETEK
usb 9-2: SerialNumber: CCVI_1.0
hidraw: raw HID events driver (C) Jiri Kosina
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
usb 3-4: Warning! Unlikely big volume range (=10361), cval->res is probably wrong.
usb 3-4: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/10361/1
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 247
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.66 Mon May 1 15:29:16 PDT 2017 (using threaded interrupts)
usbcore: registered new interface driver snd-usb-audio
clocksource: Switched to clocksource tsc
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.0/0003:046D:C332.0001/input/input12
hid-generic 0003:046D:C332.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:12.0-3/input0
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.1/0003:046D:C332.0002/input/input13
input: Plantronics Plantronics C310-M as /devices/pci0000:00/0000:00:09.0/0000:03:00.0/usb3/3-4/3-4:1.3/0003:047F:C023.0003/input/input14
hid-generic 0003:046D:C332.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:12.0-3/input1
plantronics 0003:047F:C023.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Plantronics Plantronics C310-M] on usb-0000:03:00.0-4/input3
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
device-mapper: table: 252:0: striped: Couldn't parse stripe destination
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:0: striped: Couldn't parse stripe destination
device-mapper: ioctl: error adding target to table
random: crng init done
r8169 0000:06:00.0 enp6s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
r8169 0000:06:00.0 enp6s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
NET: Registered protocol family 17
Key type cifs.spnego registered
Key type cifs.idmap registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
xt_CT: No such helper "pptp"
xt_CT: No such helper "snmp"
xt_CT: No such helper "netbios-ns"
xt_CT: No such helper "irc"
xt_CT: No such helper "irc-0"
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
xt_addrtype: ipv6 does not support BROADCAST matching
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.66 Mon May 1 14:33:30 PDT 2017
nvidia-modeset: Allocated GPU:0 (GPU-39ccd176-feea-6f17-1ee3-0762a5f97f52) @ PCI:0000:01:00.0
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 246
upowerd[1010]: segfault at 20 ip 00007fec728e5180 sp 00007ffcaf3fc5e8 error 4 in libglib-2.0.so.0.5200.2[7fec72860000+111000]
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0